The Quick Fix synthetic urine is premixed laboratory urine designed to protect your privacy during a urinary drug test. The Quick Fix is unisex so a male or female can use it to pass a drug test. To ensure passing a urinalysis, the Quick Fix contains all the ingredients normally found in urine and is balanced for pH, specific gravity, creatinine, and several other urine characteristics. The Quick Fix bottle comes with an attached temperature strip and heating pad to ensure the sample is at body temperature. The Quick Fix contains two ounces of synthetic urine as required by the DOT guidelines. If a lab demands more than two ounces, that demand is operating outside of the DOT guidelines. Request the lab record the volume of the sample before disposal and be sure to document the error.

To use, simply pour contents of Quick Fix container into urine cup at drug testing facility. Make sure sample is within proper temperature range of 94?-100?F. The Quick Fix container can be microwaved up to 10 seconds for initial heat. Be sure to pop up the top prior to heating to release pressure. After heating, close cap and shake bottle. If the temperature remains out of range after first heating, repeat procedure. If the temperature is not in range after two attempts, make sure the container has not been over heated above the 100?F (let cool a few minutes). The heater pad without the microwave will require approximately an hour to warm up to range of 90?-100?F. The heater pad can also be taped to the bottle for prolonged heat, and will keep the bottle near 100?F for up to six hours in an inside pocket of clothing being worn.